View EL1504C_1030326.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EL1504C, EL1505C - Product Brief
EL1504C, EL1505C - Product Brief
Differential Line Driver
Features
* Complete ADSL differential driver * 45VP-P differential output drive into 200 * -60dBc typical output distortion at full output at 2MHz * Drives 8 single-ended video loads, or 4 S-VHS loads, or 4 differential video loads * Power surface-mount package
General Description
The EL1504/5C contains two wideband high-voltage drivers. It is designed to drive 45VP-P signals at 2MHz into a 200 load differentially with very low distortion. Both amplifiers are of the current-feedback type, giving high slew rates while consuming moderate power. They retain frequency response over a wide range of externally set gains. The EL1504/5C operate on 5V to 15V supplies, and maintain their bandwidths and linearities over the supply range. The EL1504C, in a 20-Pin Fused Lead SOIC package, has eight center pins which are used as ground connections and heat spreaders. This facilitates the use of external heatsinking to increase the power handling of the device. The EL1505C, in a 16-Pin SOIC package, is designed for applications which do not require full power and where a smaller PCB footprint is desirable. The packages are specified for operation over the full -40C to +85C temperature range.
Outline # MDP0027 MDP0027
Applications
* * * * ADSL line interface HDSL line driver Video distribution amplifier Video twisted-pair line driver
Ordering Information
Part No EL1504CM EL1505CM Package 20-Pin SOL 16-Pin SOL Tape & Reel
Connection Diagram
RL RG 1 OUTA VS3.3F Tantalum RF 2 3 4 5 6 7 INA+ 8 NC NC 9 10 + + 19 18 17 16 15 14 13 12 NC 11 NC 20
RL RG RF OUTB VS+ 3.3F Tantalum
INB+
March 8, 1999
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a "controlled document". Current revisions, if any, to these specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
(c) 2001 Elantec Semiconductor, Inc.
EL1504C, EL1505C - Product Brief
EL1504C, EL1505C - Product Brief
Differential Line Driver
General Disclaimer
Specifications contained in this data sheet are in effect as of the publication date shown. Elantec, Inc. reserves the right to make changes in the circuitry or specifications contained herein at any time without notice. Elantec, Inc. assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement.
WARNING - Life Support Policy
Elantec, Inc. products are not authorized for and should not be used within Life Support Systems without the specific written consent of Elantec, Inc. Life Support systems are equipment intended to support or sustain life and whose failure to perform when properly used in accordance with instructions provided can be reasonably expected to result in significant personal injury or death. Users contemplating application of Elantec, Inc. Products in Life Support Systems are requested to contact Elantec, Inc. factory headquarters to establish suitable terms & conditions for these applications. Elantec, Inc.'s warranty is limited to replacement of defective components and does not cover injury to persons or property or other consequential damages.
Printed in U.S.A.
March 8, 1999
Elantec Semiconductor, Inc.
675 Trade Zone Blvd. Milpitas, CA 95035 Telephone: (408) 945-1323 (888) ELANTEC Fax: (408) 945-9305 European Office: +44-118-977-6020 Japan Technical Center: +81-45-682-5820
2

▲Up To Search▲

Price & Availability of EL1504C

	To Download EL1504C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .